24K Chopped Forged Carbon Fiber Matte Black Car Vinyl Wrap Sticker Decal Sheet. For smaller size orders, top clear protective film will be peel off to prevent tunneling. Size of 12"x60" Include 1 set of Basic Tool Kit. Size of 24"x60" and above Include 1 set of Deluxe Tool Kit. Thickness of film (C=10 micron).
Thickness of film with release liner. Hybrid vinyl film with air channels. (Designed for vehicle exterior with prefect paint condition). Solvent based adhesive, odor: solvent odor. (Low-Medium Tack - Easy to reposition).
Heat gun or household blow dryer for shaping is required. Low - medium tack self adhesive.
Easy to fit in most tight spots or corners (primer 94 is required for non sticky surfaces, curves & corners). Fluorescent Neon colors tend to fade faster than normal colors.
Fading can be reduced with over lamination, preventing stretched areas, which fade even faster, and shelter from high U. Material is specially made for vehicle exterior paint surface in good condition. Buyers take self responsibility on unsuccessful result on other usage. Always pre-test vinyl installation on vehicles. Due to different monitors/calibrations, colors may vary slightly from the pictures. Film colors can vary slightly from roll to roll. For best result, professional installation is required; Buyers take responsibility on physical damage during installation such as over heating, over stretching, ripping. This vinyl is designed for vehicle exterior wrap use ONLY. This vinyl won't stick good on polyethylene, polypropylene, ABS, PET/PBT blends, concrete, wood, glass, plastic, textured, aluminum, metal. Installers must use primer 94 for additional adhesion. This vinyl is not originally designed for plotter or cutter use.
We will try our best to solve the problem with you.