Arris C250 Fpv Racing Quad Fpv Drone Rtf Combo With Arris Ev800 Goggle

Submitted by admin on Mon, 07/08/2019 - 15:56

ARRIS C250 FPV Racing Quad FPV Drone RTF Combo with ARRIS EV800 Goggle

ARRIS C250 FPV Racing Quad FPV Drone RTF Combo with ARRIS EV800 Goggle

ARRIS C250 RTF FPV combo comes with arris S2205 brushless motor, ARRIS falcon 20A ESC, 5042 3 blade propeller, ARRIS XAT700M camera, 5.8G 200mW video TX and antenna, ARRIS 4s 1500mah 50C battery and EV800 FPV goggle. The ARRIS C250 RTF is fully assembled, tuned and tested before it left the factory.

With the goggle, you can begin you FPV journey. Specifications: Dimension:195mm x 230mm x 42mm (Propellers not included) Diagonal Wheelbase: 250mm Flight Controller:F3 flight Controller Frame Material: Pure Carbon fiber sheet BNF weight:350g Radio System: Flysky FSi6 Radio with Receiver Camera: ARRIS XAT700M fpv camera FPV TX: 5.8G 200mw 40CH Antenna: 5.8G Antenna Flying Time: 10min hovering Battery: ARRIS 4S 1500mah 50C Lipo Goggle: EV800 FPV Goggle.

Camera Upgrade to ARRIS XAT700M FPV Camera. ARRIS C250 is made of pure carbon fiber material. The layout design of the C250 is reasonable, the standard flight controller and PDB board can install there. On the frame, there is reserved space for the XT60 female battery connector.

The motor arm has holes for 220x series motors, and both 5 inches and 6 inches propellers can install on the C250 frame. With the adjustable camera mount on the frame, you can adjust the angle of the camera freely. ARRIS C250 also comes with the 3M foam damper which has good vibration-suppressing effect during the landing. ARRIS S2205 2300KV Brushless Motor. This motor is specially designed for 200-300 sizes multirotors, which weighs only 35g.

The ARRIS S2205/2300KV brushless motor is suitable for high speed ESC, light weight fixed-wing copter. And it offers great performance at affordable price. ARRIS Falcon 20A ESC- These Falcon series ESC is specially developed for multirotor aircrafts. The use of high performance MCU processor gives a smooth, linear and precise response. The Falcon 20A brushless ESC keeps the weight down and comes in a small package but it still has top quality.

With low resistance IC, the Falcon 20A can produce little heat and give more efficiency. Firmware utilizing Oneshot125 communication protocol, which makes it to be very fast and responsive to throttle movements. Easy upgrading and downgrading firmware is a simple process through the BLHeli Suite. ARRIS 5042 High Quality Propeller -The 3-blade propeller is specially designed for FPV speed racer, 10% higher effeciency than normal propellers.

ARRIS C250 RTF comes with the F3 standard version flight controller. When we install it, we use the Power Distribution Board PDB with filter. Which makes the wires clean the tidy. ARRIS XAT700M FPV Mini camera and installing method. ARRIS TS5823S 5.8G 200mW 40CH Mini Video Transmission TX and light antenna.

The ARRIS TS5823S transmitter packs 200mW of ultra clean 5.8GHz power in a micro sized video/audio transmitter! A must for those looking save size and weight while still getting good performance. The ARRIS TS5823S is transmitting a full range of 40 channels and only weighs 10g. It's perfect for a wide range of aircraft!

ARRIS C250 comes with a high brightness LED. The LED of the ARRIS C250 installed on the two sides of the C250 Frame. For this LED, you can change the color of the LED light through the DIP switches. 7 color for you to choose. ARRIS 4S 14.8V 1500mAh 50C Graphene LiPo Battery.

Specifications: Item Name: 1500mah 50c 4s Lipo Nominal Capacity: 1500mAh Dimension: 29mm x 34mm x 80mm Nominal Voltage: 14.8V Weight: 162g Plug Type: XT60. FlySky FS-i6-M2 2.4GHz 6-Channel Transmitter with FS-iA6B receiver. Specifications: Channels: 6 Channels Model Type: fixed-wing/glider/helicopter RF range: 2.405-2.475Ghz Bandwidth: 500Khz Band: 142 RF Power: Less than 20 dBm 2.4G System: AFHDS 2A and AFHDS Code type: GFSK Sensitivity: 1024 Low voltage warning: Less than 4.2V DSC port: PS2; output: PPM Charger port: No ANT length: 26mm2 (dual antenna) Weight: 392g Power: 6V 1.5AA4 Display mode: Transflective STN positive type, 12864 dot matric VA7339mm, white backlight Size: 17489190mm Online update: yes Color: Black Certificate: CE0678, FCC. ARRIS X-Speed 250B has integrated with a remote controller battery warning buzzer , pilot can set the threshold (adjustable) according to CF parameter-adjustment software. When you turn on the SWD switch to 2 position, the buzzer will "beep beep", it is easy for you to find the quad.

Self-level mode is the easiest to fly, because when you leave the stick at the center and not controlling it, your drone just level itself and stays there. This is good for beginners. Manual mode is useful for acrobatics such as flips or rolls, or FPV when smooth and fast control is desired. The picture below is what we set on the Flysky radio. Main Features of EV800 Goggle: - Separable design, 5 inch screen can be used as small monitor on radio controller or with tripod; - HD high brightness 5inch LCD specially tuned for FPV racing; - Built-in super sensitiveness 5.8GHz 40ch receiver, especially with RaceBand; - Come with advanced auto-searching function ad show you the working frequency on screen; - Built-in 3.7V/2000mAh battery, each full charge revive around 3.5hours working time; - Wide range re-charge voltage 5-12V, power banks or 2S/3S batteries can be used as back-up power source, to prolong the working time; - Ergonomic design fit your faces; - Super-wide visible angle up to 82 degree; - 92% transparent lens adopted, no distort, no blur on the adage of screen; - Light weight 375g with 3.5hr 2000mAh battery, RTF for any scale racing game.

5 inch 800480px HD high brightness LCD. Screen size: 5.0 inch Screen resolution: 800480 (No blur after enlarge by the lens) Screen brightness: 600cd/m2 with special high brightness backlight LED for outdoor FPV View Angle: 140/120 degree(Horizontal/Vertical). 3x boost of the video to acquire intense feel-in-there video; 92% transparent rate no distort of light. Built-in 3.7V/2000mAh battery; Each battery circle offer around 3.5hr working time; 5-12V wide recharging voltage range, typical recharging voltage is 5V Accepts 5V power banks or 2S(7.4V)/3S(11.1V) battery as back-up power to have long working time. Build in 5.8G 40CH Raceband receive. Dimension: 180x145x82mm Weight: 375g with 3.5hr 2000mAh battery Belt: three-ways adjustable belt. Package Include: 1 x ARRIS C250 Racing Quad Frame 4 x ARRIS S2205 2300KV Brushless Motors 4 x ARRIS Falcon 20A BLheli Brushless ESC 4 x ARRIS 5042 3-blade Propeller (2CW + 2CCW) 1 x F3 Flight Controller (Standard Version) 1 x ARRIS XAT700M Mini Camera 1 x 5.8G 200mw 32CH FPV TX 1 x FPV Transmitter Antenna 1 x FlySky FS-i6-M2 Transmitter with FS-iA6B receiver 1 x ARRIS Buzzer TMB12A05 2 x 7 Colors RGB 5050 LED 1 x ARRIS 14.8V 1500mah 50C Lipo Battery 1 x ARRIS EV800 5inch 800 x 480 FPV Goggles. SKYRC IMAX B6AC V2 Charger. Or IMAX B6 Mini with Adapter. The item "ARRIS C250 FPV Racing Quad FPV Drone RTF Combo with ARRIS EV800 Goggle" is in sale since Friday, December 16, 2016. This item is in the category "Toys & Hobbies\Radio Control & Control Line\RC Model Vehicles & Kits\Quadcopters & Multicopters". The seller is "hobbywing" and is located in Dallas, Texas. This item can be shipped to United States.

Model: ARRIS C250
Country/Region of Manufacture: China
Vintage (Y/N): Yes
Model Grade: Hobby Grade
Material: Carbon Fiber
Size Class: 250
Type: Quadcopter
Features: First Person Visual (FPV)
Required Assembly: Ready to Go/RTR/RTF (All included)
MPN: CA0055
Fuel Type: Electric
Brand: ARRIS

ARRIS C250 FPV Racing Quad FPV Drone RTF Combo with ARRIS EV800 Goggle

Tags:

arris

c250

racing

quad